Canon F-1 Manuel de démarrage rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Canon F-1. Canon F-1 12 pages. Booster t finder
Également pour Canon F-1 : Manuel d'instructions (50 pages), Manuel (24 pages), Manuel d'instruction (13 pages), Manuel de démarrage rapide (4 pages)

Imprimer la page

SPECIFICATIONS

Canon Battery Pack FN

Specifications

Structure:

Consists of a motor control c ircuit and a chamber for

loading twelve AA size batterie

with a battery

magazine.

Winding Speed: Three

changeable modes of H (5 frames

/sec.

L (3.5 frames /sec,) and S (single frame)

Operation:

Activated by the auxiliary motor drive

release

Bat-

tery Pack

(vertical shot), shutter release button on the

camera or on top of

the

motor drive grip (horizontal shot),

Re-

mote Switch 3 or 60 using connecting cords, or with the

transmitter of Wireless Controller LC-1

Shutter Speed Coupling Range:

1/60

112000

mode

;

112000

or S

mode.

Frame Counting:

Frame counter of the AE Motor Drive FN

shows

the number

of unexposed frames

Functions indepen-

dently of camera 's frame counter.

Safety Circuit:

When

the

film

competely exposed or rewound

or if the battery power

fails,

film windinglrewinding

automat-

ically stops and the LED on AE Motor Drive FN flashes

Number of Film Rolls: In

normal temperature about

fifty

rolls of

36-exposure film using

mode.

Power Source: Twelve

AA size

batteries,

alkaline-manganese or

carbon zincs.

Size:

156.7mm(W) x 75.3mm(D) 36mm(H); (6-3/16" x

16"

1- 1/

16")

Weight:

449g, 15-13/

ozs.

(including batteries)

Canon High Power Ni-Cd Pack FN

Specifications

Structure:

Consists of a motor control

ircuit and built-in Ni-Cd

battery.

Rechargeable

with Ni-Cd Ch arger MA /FN

Winding Speed:

Three operating speeds of H (5 frames /sec,)

(3.5 frames /sec.) and S (single frame).

Operation:

Activated by the auxiliary motor drive

release

High

Power Ni-Cd Pack FN (vertical shot), shutter release

button on the ca:mera or on top of the motor drive grip

(horizontal shot),

Remote

Switch 3 or 60

using

connecting

cords, or with the transmitter of Wireless Controller LC-1.

Shutter Speed Coupling Range:

1/60 to 1/2000 in H mode

;

112000

or S mode.

Frame Counting:

Frame counter of the AE Motor Drive FN

shows the number of unexposed frame

Functions

indepen-

dently of camera 's frame counter.

Safety Circuit:

When

the

iilm is completely exposed or

rewound

or if the battery power

fails,

film winding /rewinding

automat-

ically stops and

the LED

on AE Motor Drive FN flashes

Number of Film Rolls: In

normal

temperature

about fifty rolls of

36-exposure

film

using H mode. In - 20°C temperature, about

twenty rolls of 36-exposure film

Power Source: Built-in Ni-Cd

battery,

14.4V.

Size:

156.7mm (W) x 75.3mm(D) x 36mm(H); (6-3/16" x 2-

15/16" x

1-7/16")

Weight:

469g,

16-9/

16 ozs.

e!)

Canon Ni-Cd Pack FN

Specifications

Structure:

Consists of a motor control circuit and built-in Ni-Cd

battery. Rechargeable with Ni-Cd Charger

MA/FN.

Winding Speed: Three

operating speeds of. H (4.5 frames/ sec.),

L(3 frames /sec.) and S (single frame)

Operation:

Activated by the auxiliary motor drive release on Ni-

Cd Pack FN (vertical shot), shutter release button on the

camera or on

top

of the motor drive grip (horizontal shot), Re

mote Switch 3 or 60

using

connecting cords, or with the

transmitter of

Wireless

Controller LC-1.

Shutter Speed Coupling Range:

1/60 to 1/2000 in

mode

;

112000

in L or S

mode.

Frame Counting:

Frame counter of the AE Motor

Drive

shows the number of unexposed frame

Functions

indepen-

dently of camera 's frame

counter.

Safety Circuit: When

the film is completely exposed or

rewound

or if the battery power fails, film winding

rewinding automat-

ically stops and

the LED

on AE Motor Drive FN flashes

Number of Film Rolls: In

normal temperature about thirty

rolls

of 36-exposure film

using H

mode.

Power Source: Built-in

Ni-Cd battery, 14.4V

Size: 156.7mm(W)

x 67 .8mm(D) x 26.6mm(H); (6-3/16" x

11/16" x

1-1/16")

Weight:

212g, 7-1/2

ozs.

SG1 -A8

Canon Film Chamber FN-100

Specifications

Type:

Bulk film chamber for use in conjunction with AE

Motor

Drive FN.

Attachment: By

exchange with camera's back cover.

Film Magazine:

Two magazines, one each for supply and take-

up, for exclusive use with Film Chamber FN-100.

Film Loading:

Film loading into Film Magazine FN-100 using

Film

Loader 250

a dark room.

Maximum Capacity:

100 frames of 35mm roll film.

Film Advance: Film

advance via motor drive with a provision for

synchronous film take -up.

Automatic Film Stop:

When the last frame passes over the

guide

roller,

an LED warning lamp of the motor drive lights

up.

Automatic Safety Circuit:

When the shutter button is

pressed,

the film chamber will not operate and the motor drive's wa

rn-

ing lamp lights up in the following cases:

When there is no film in the film chamber or the film has

run

out;

2) When there is film loaded and the Open/Close knob on

the take-up side is at "OPEN ."

Frame Counter: Manually

set. subtractive type

Film Magazine Removal:

Via two eject levers, one inside each

magazine

chamber.

Shutter Release:

Four shutter buttons (one on film

chamber,

two

on motor drive plus camera's) each with a lock lever.

Back Cover Interlock:

Back locked with both OPEN /CLOSE

knobs at

"CLOSE"

or OPEN /CLOSE knob on magazine supply

side at "OPEN

Dimensions:

258.8(W) x 108.5(H)

72.3(D)mm

;

(10-3

/ 16"

1/4"

2-7/8"

)

Weight:

641 g, 22-5 /8

OlS.

.(!)

Canon Data Back FN

Specifications

Attachment: By

exchange with camera's back cover.

Data Setting: Done

by three rotating

dials.

Data Setting Dials:

Right dial

32 digits and two blanks (0'0,0-31)

0 denotes a blank on film

Central Dial

39 chara cters and one blank (0,0-31, A-G)

Left dial: 39 characters and one blank (0

0 to 9,81 to

92),

Roman

numerals I

X and a to g)

Data Recording:

Data is automatically

recorded

in lower right-

hand

corner of frame and through the back of the film by a

built-in flash unit coupled to the shutter release

A separate

button

provided for manual data exposure.

Exposure (Light Intensity) Adjustment:

By setting dial to one

of three positions according to type of film.

Indicator Lamp:

Neon pilot

lamp

lights up to indicate Data Back

is ready for firing

Power Source:

One 6V alkaline -manganese (4LR44) good for

approximately 2,000 flashe

Approximately 1,000 flashes

when using AE Power Winder FN for sequential shooting at 2

fps.

Main Switch:

ON-OFF,

when set

to OFF,

indicator

lamp

goes out

and no data will be recorded

Size:

103mm(W) x 14.3mm(D) x 49.2mm(H); (4" x

16"

7/8"

)

Weight:

166g, 6 ozs. (including battery)

0Canon Interval Timer TM-1 Quartz

Specifications

Connection:

By inserting the plug of the timer to the remote

control jack of one of the power packs for the AE Motor Drive

FN or to the remote jack of the AE Power Winder FN

Time Intervals:

Shooting in fixed intervals from one second to

minutes.

Settings for

5, 10, 15, 20,

30 and 40 second

and 1, 2,

5, 10,

20, and 30

minutes.

Switch Functions:

Power on /off of time setting and separate

on /offlrunning

lock

switch for activating shutter release

Battery Check: With

battery checklight LED on the timer

Power Source:

One 6V alkaline-manganese (4LR44)

Size:

38mm(W) x 19.5mm(D) x 94mm(H); (1-9/16" x

13/16"

11/16")

Weight:

60g

2-1/8

OlS.

(including battery)