Air Creation GTE 582 S Manuel d'instruction et d'entretien - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et d'entretien pour {nom_de_la_catégorie} Air Creation GTE 582 S. Air Creation GTE 582 S 18 pages.

Imprimer la page

After any heavy landing :

• Check the front fork, remove and inspect the fork pivot and wheel axis.

• Check the seat frame and lower beam for distortion. Check seat seams.

• Check the upper beam and the front strut, the swivel joint (movement, cracks), the engine

support and the engine mounting rubber mounts.

• Check the rear wheel assembly, loosening of assembly devices and shock absorber

pressure.

• The structure of the wing must be completely inspected in our premises or by an approved

technical establishment after any heavy landing or even for slight damages.

WARNING :

Changing all NYLSTOP nuts after loosening is mandatory. Always secure such nuts using

particular LOCTITE glue.

Instruction and Maintenance Handbook GTE - CLIPPER

Tél. : 33 (0) 4 75 93 66 66 - Fax : 33 (0) 4 75 35 04 03 - Internet : www.aircreation.fr – [email protected]

AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France

EDITION : JUNE 2005

PAGE : 14