Astria ValiantOD36P3 Manuel d'installation et d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Astria ValiantOD36P3. Astria ValiantOD36P3 20 pages. Outdoor vent-free firebox

Imprimer la page

INSTALLING FIREPLACE HOOD AND SCREEN

1. For Indoor models, attach hood and front panel assembly by snapping

panel assembly into fireplace opening (see Figure 12).

2. For Indoor/outdoor models, loosen screws along the fireplace top

face. Remove two screws along fireplace face side. Slide hood

underneath screws on top and tighten screws. Replace screws on

side of fireplace face side securing hood to the face (see Figure

13).

3. Insert each screen rod through all rings located at top of screen.

4. Insert first rod into rear hole in left side of firebox. Fasten rod to

rear hole near center of firebox using #10 x 3/8" Phillips screw

provided (see Figure 14).

5. Insert other rod into front hole on right side of firebox and fasten

using remaining Phillips screw.

Hood

Figure 12 - Hood Placement

(Model May Vary From Illustration)

Hood

Remove/Replace

Side Screws

Figure 13 - Hood Placement

(Model May Vary From Illustration)

INSTALLATION Continued

Loosen Top

Screws

Astria.US.com

Top View of Rod Layout

Rear Hole

Front Hole

Rod

Ring

Screen

Figure 14 - Installing Fireplace Screen (Model May Vary From

Illustration)

Identification

Label

Location

Screw

126773-01B