Flying Industry Development CWC-3 Manuel rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Flying Industry Development CWC-3. Flying Industry Development CWC-3 2 pages. Rf wireless remote control dc motor controller / transmitter & receiver
Également pour Flying Industry Development CWC-3 : Manuel rapide (2 pages)

Imprimer la page
3) Press and hold "K1" button of receiver; when signal LED on the receiver begin to shine, release "K1" button. Before signal LED shines 5
seconds, press ▼ button of transmitter, if the signal LED off, that means learning is successful.
Delete the button of transmitter:
We have learned transmitter to the receiver. If you don't want the receiver to work with transmitter, you can delete all codes of transmitter which
are stored in the receiver. You can operate as following:
Press and hold "K3" button of receiver; when signal LED on the receiver begin to shine, then flicker, finally off, that means deleting is successful.
Press and hold "K2" button of receiver; when signal LED on the receiver begin to shine, then flicker, finally off, that means deleting is successful.
Press and hold "K1" button of receiver; when signal LED on the receiver begin to shine, then flicker, finally off, that means deleting is successful.
Note: Before you change from motor rotates in positive direction to reversal direction or from motor rotates in reversal direction to positive
direction, you should stop rotating of motor firstly, then remote control motor.
Application Circuit
RF module
Antenna
IC
K1 K2 K3
Signal LED
Relay 1
Relay 2
Restrictive switches
OUTPUT
INPUT
X1
X2
M
_
+
DC Motor
Power supply
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com