Canon EOS-1Ds Mark III Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Canon EOS-1Ds Mark III. Canon EOS-1Ds Mark III 42 pages. Digital slr camera
Également pour Canon EOS-1Ds Mark III : Livre blanc (38 pages), Manuel d'instruction (19 pages), Conseils et techniques (35 pages), Manuel du produit (39 pages), Manuel du produit (36 pages), Manuel de l'utilisateur du logiciel (50 pages), Brochure (39 pages), Manuel (25 pages), Brochure (2 pages), Brochure (32 pages), Manuel des fonctions (21 pages), Conception et performance (25 pages), Spécifications (2 pages)

Imprimer la page

Canon EOS-1Ds Mark III Manuel d'instruction

Connecting an EOS-1D Series Camera to Your Computer

Connection procedure for the EOS-1D Mark II N, EOS-1Ds Mark II, EOS-1D Mark II, EOS-

1Ds and EOS-1D

Before downloading images to your computer or specifying the camera settings, you must

connect the camera to your computer with the dedicated IEEE1394 interface cable supplied

with the camera. You can connect the camera while your computer is running.

For instructions on connecting cameras other than the EOS-1D series cameras and your

computer, refer to the

page.

Plug the dedicated cable into the computer.

Plug the cable into the IEEE1394 port.

Refer to the computer User's Manual for

information on the terminal areas.

Plug the dedicated cable into your camera.

For cameras supplied with the cable

protector, attach the cable protector to the

camera, and then follow the procedure

below to connect the dedicated cable.

Make sure the <

> mark on the plug is

facing the top of the camera and then

connect the plug to the camera's

> terminal.

Set the camera's power switch to <ON>.

[EOS Utility] starts up and main window is displayed, the camera is ready to

communicate with your computer. Proceed to "Downloading Images from Your

Camera"

(p.1-6)

continuously.

When the camera selection window appears, select the connected camera and then

[EOS Utility] will start up.

The above window shows information displayable when EOS-1D Mark II N is

connected. The displayed information varies depending on the camera model

connected.

If the dialog box on the right appears, select [Canon

EOS Utility Downloads images from EOS camera] and

then click the [OK] button to start [EOS Utility].

If [EOS Utility] does not start, double-click the [EOS

Utility] icon on the desktop or click the [Start] button

select [All Programs] ([Programs] in Windows 2000)

[Canon Utilities]

[EOS Utility]

[EOS Utility].

Cover/Table of

Contents

Introduction

Downloading Images

from the Camera

Setting the Cameras

other than the EOS-1D

Series Cameras

Setting the EOS-1D

Series Cameras

Remote Shooting

Troubleshooting

Index

1-4