Asus C1241Q Manuel de l'utilisateur - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Asus C1241Q. Asus C1241Q 40 pages.

Plug one end of the VGA/HDMI/DP cable to the monitor's VGA/HDMI/

DP jack.

Connect the other end of the VGA/HDMI/DP cable to your computer's

VGA/HDMI/DP jack.

Tighten the two screws to secure the VGA connector.

•

To connect the audio cable: connect one end of the audio cable to the

monitor's line in port, the other end to the computer's audio-out port.

•

To use the earphone: connect the end with plug type to the monitor's line out

port when an HDMI/DP signal is fed.

•

To use the USB 2.0 ports (C1241QSB only): Take an USB 2.0 cable, and

plug the smaller end (type B) of the USB upstream cable to the monitor's USB

upstream port, and the larger end (type A) to your computer's USB 2.0 port.

Make sure your computer is installed with the lastest Windows 7/Windows 8.1/

Windows 10 operating system. That will enable the USB ports on the monitor

to work.

When these cables are connected, you can choose the desired signal from the

Input Select item in the OSD menu.

2.5

Turning on the monitor

Press the power button

power indicator

2-6

. See page 1-2 for the location of the power button. The

lights up in white to show that the monitor is ON.

Chapter 2: Setup