Baumer HUBNER BERLIN OGS 60 Manuel d'installation et d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Baumer HUBNER BERLIN OGS 60. Baumer HUBNER BERLIN OGS 60 32 pages. Incremental/sine encoder
Également pour Baumer HUBNER BERLIN OGS 60 : Instructions de montage et d'utilisation (32 pages)

Imprimer la page
1

General notes

1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct product operation
i
Information
Recommendation for product handling
1.2
The incremental encoder OG 60 and the sine encoder OGS 60 are opto electro nic precision
measurement devices which must be handled with care by skilled personnel only.
1.3
The expected operating life of the device depends on the ball bearings, which are equipped with
a permanent lubrication.
1.4
The storage temperature range of the device is between -15 °C and +70 °C.
1.5
The operating temperature range of the device is between -30 °C and +85 °C,
restricted in potentially explosive environments, see section 2,
measured at the housing.
1.6
EU Declaration of Conformity meeting to the European Directives.
1.7
The device is UL approved (not applicable for operation in potentially explosive atmospheres).
1.8
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.9
Maintenance work is not necessary. Repair work must be carried out by the manufacturer. Al-
terations of the device are not permitted.
1.10
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.11
Encoder components are to be disposed of according to the regulations prevailing in the re-
spective country.
i
Warning!
Damaging the seal
MB185T1 - 11072301
on the device invalidates warranty.
Baumer_OG60-OGS60-T1_II_DE-EN (16A4)
1
General notes
2