Baumer GT 7.08 Instructions de montage et d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Instructions de montage et d'utilisation pour {nom_de_la_catégorie} Baumer GT 7.08. Baumer GT 7.08 28 pages. Tachogenerator
Également pour Baumer GT 7.08 : Manuel d'installation et d'utilisation (28 pages)
Imprimer la page
2
Security indications
2.1
Risk of injury due to rotating shafts
Hair and clothes may become tangled in rotating shafts.
• Before all work switch off all voltage supplies and ensure machinery is stationary.
2.2
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
• Never restrict the freedom of movement of the device.
The mounting instructions must be followed.
• It is essential that the specified clearances and/or angles are observed.
2.3
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the device.
• Never use force.
Mounting is simple when correct procedure is followed.
• Use suitable puller for dismounting.
2.4
Risk of destruction due to contamination
Dirt penetrating inside the device can damage the device.
• Absolute cleanliness must be maintained when carrying out any work on the device.
• Never allow lubricants to penetrate the device.
2.5
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the magnets and the carbon brushes. Dismounting a device, se-
cured to a shaft by adhesive may lead to the destruction of the device.
2.6
Explosion risk
Do not use the device in areas with explosive and/or highly inflammable materials.
They may explode and/or catch fire by possible spark formation.
MB126 - 11055737
Baumer_GT7_II_DE-EN (19A1)
Securtiy indications
2
4