AMPULLA SENTRY Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AMPULLA SENTRY. AMPULLA SENTRY 17 pages.
Imprimer la pageQ: The dash cam shows "card is full" and no more
recording.
A: I believe you have turned on the "G-sensor" function.
The G-sensor will detect concussion and lock the
corresponding video clip. A heavy door shut or driving
on a bumpy road may active the G-sensor, so the loop
recording function will not overwrite this locked footage.
Time by time, the memory card will get full even with
loop recording turned on. If you want to avoid this
situation, you can change the sensitivity level of
G-sensor in the settings or just turn off the "G-sensor"
Q: How do you make the camera record when the car
turns on and not stop until the car turns off? It
seems to go into standby if it doesn't sense
motion.
A: You just need to turn off the motion detection feature to
keep the dash camera recording when the car turns
on.
Q: What is max capacity of micro SD card that the
camera will accept?
A: The Sentry dash camera actually supports SD card up
to 32GB, but not 64GB. In order to ensure a stable
- 27 -
high speed transmission of 1080P, a class 10 high
speed SD card is required and maximum card capacity
is up to 32GB. The larger card size will significantly
reduce the transmission speed and stability for the
dash cam, which is similar to computer hard disk.
Q: How can I save/lock a video manually?
A: You the press the
the screen, the third top on your right) to manually lock
the current video any time you want.
Q: It makes a rattling noise when operating, is this
item is defected?
A: Firstly we strongly recommend you stop using this SD
card in a computer until it is re-formatted. This issue is
usually caused by a failure of formatting the SD card.
To format the SD card will resolve this issue.
Q: The SD card was deleted in Mac OS X system, but
the dash cam still shows card full. Why is that?
A: When you use a MAC, you have to "empty the trash"
after you format the SD card. If you are using Disk
Utility to format the SD card in Mac as FAT32, please
use Master Boot Record instead of GUID Partition
Map.
Emergency Lock button (facing
- 28 -