Amroad ID5101 Manuel d'installation rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Amroad ID5101. Amroad ID5101 4 pages. Home station
Également pour Amroad ID5101 : Manuel d'installation (20 pages)
Imprimer la page
ITEM
Description
Device Name
In the drop-down menu, select the device name that your
ID5101's GPIO port is connected to.
Triggered by
For 8 Input ports only, user may select "Positive" or
"Negative".
NOTE: This means user can define the light status (Green
or Red) on your ID5101 Safety Sub-menu.
En/Disable
Select "Enable" or "Disable"
User may select "Disable" when the ID5101's GPIO port is
not connected to any device.
NOTE: If user doesn't install some safety device, we suggest SI select "Disable"
so that the safety device will be displayed as gray light on ID5101.
Configure on ID5101
This section describes how to set up your Video Indoor Station. You may press Setting
soft-function key to enter this Setting page. There are 8 major items for configuration:
You may use [ ] and [ ] keys to select preferred item, and then press Enter key [ ]
or press Enter soft-function key to take further actions.
Press Setting soft-function key to enter Setting page
NOTE: 1. Network Setting, SIP Setting, Stream Setting, and Service Setting are
protected by password. (Default password: 1234)
2. This setting password is different from Security password.
Network Setting
This Network Setting allows you to set
up the important parameters of
network connection, and it is protected
by password.
NOTE: You need to enter password to
enter "Network Setting". Default
password is "1234". You may
change password by using Chg
Password soft-function key.
ITEM
Description
Net Type
This item allows you to select type of IP address of this
device. There are 3 options DHCP, Static IP and PPPoE, the
default is DCHP.
DHCP - If you wish to connect this device to an exist
network and get dynamic IP address from the DHCP server,
please select this one. You will see all other items in this
mode are grayed out. In most of cases, DHCP Client is used
for connecting LAN (Local-Area-Network).
Static IP - If you wish to use Static IP address to
connect to network, you may select this one. You may get
Static IP when you applying SIP service from carriers or
operators. You will see last 2 items for PPPoE are grayed
out.
800-0000007-00-00
Device Setting page
directly. Your phone will trigger ADSL model to connect to
Internet automatically when you are dialing phone number.
IP Address
You may fill in IP address here if Static IP is selected.
Subnet Mask
You may fill in Subnet Mask address here if Static IP is
selected.
Default
You may fill in default gateway address here if Static IP is
Gateway
selected.
Primary DNS
You may fill in primary DNS server address here if Static IP is
selected.
Secondary DNS
You may fill in secondary DNS server address here if Static
IP is selected.
PPPoE Account
You may fill in PPPoE account ID or name here if PPPoE is
selected in IP type selection.
PPPoE
You may fill in PPPoE account password here if PPPoE is
Password
selected in IP type selection.
Web UI
This item allows you enable or disable the
Web-User-Interface HTTP service. Web UI will be not
available if disabled.
SIP Setting
This setting allows you to se up necessary parameters of SIP services and it is password
protected. Default password is "1234". You may change password by using Chg
Password soft-function key.
ITEM
Description
Phone Number
The phone number of your ID5101. Normally it is provided by
service provider. You can also set an extension number here
if connecting to an IP PBX.
Display Name
Initial of Display Name. This name will show on the IP phone
of called parties. You may fill in the preferred name here.
Account
You may fill in your account name of SIP service here.
Password
You may fill in the password of your SIP service account
here.
Mode
This item allows you to select the working model of SIP
service. Select "Server Mode" mode if this phone is
connected to a SIP server or IP PBX. Default setting is
"Peer-to-Peer Mode".
Protocol
You may select the correct low level communication protocol
here. There are 2 options: UDP and TCP. You have to
confirm which one the service is using from your service
provider. Default setting is UDP.
SIP Proxy
You may fill in IP address or domain name of the SIP Proxy
Server here.
SIP Registrar
You may fill in IP address or domain name of SIP Registrar
Server here.
NOTE: For more detailed information, the setting of Video Indoor Station and the Web UI
Configuration, please refer to the ID5101 SI Manual.
Extra NOTE
NOTE 1: To open the door by pressing the " # " keypad on ID5101 Video Indoor Station,
the door must have been installed "Electrical-door Lock".
NOTE 2: ID5101 RFID Internal Module, ISO 14443A Compliant/ 13.56 MHz RFID Mifare.
Amroad Technology Inc.
4
PPPoE - This selection is for connecting ADSL modem
www.amroad.com.tw