Advanced Electronics MXPro4 Mxp-007 Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Advanced Electronics MXPro4 Mxp-007. Advanced Electronics MXPro4 Mxp-007 10 pages. Relay output cards

Imprimer la page

Advanced Electronics MXPro4 Mxp-007 Manuel

Program the Relay Outputs.

Each relay output can be independently programmed in the same way as other outputs on the panel.

On the PC configuration software the outputs are under the "On-board" devices and shown as "Panel O/C-1"

through to "Panel O/C-8".

O/C-1 and O/C-2 only for the Mxp-007

O/C-1 to O/C-8 for the Mxp-008

By default, the relays are all in the same Output Group, 199, but this can be changed as required. In the example

below, the relays have been assigned to groups 180 to 187. These output groups can be programmed as required.

For a more detailed explanation of assigning output groups refer to PC Net manual, see document reference 680-

021.

The properties that can be assigned to each relay output are depicted in the boxes on the "Point Details" section.

By ticking the appropriate box, the relay will take on those assigned properties.