Anchor Venue Series Manuel d'instructions d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Anchor Venue Series. Anchor Venue Series 8 pages. Structures
Également pour Anchor Venue Series : Manuel d'instructions d'installation (7 pages)
Imprimer la pageStep 5 - For Venue
Eave cables with turnbuckles (Figure 5f) are required for mid liner installation. Loosen nuts and bolts at location shown in
Figure 5e, slide L-bracket in place and tighten bolts. Adjust turnbuckle until cable is tight.
Mid Eave Bar
Cables for mid fastens into
L-Bracket
Step 6
Attach quick links and tie pull rope as shown in Figures 6a & 6b. Run rope thru ey-
enut as shown in Figure 2. Run rope back down and behind eave cable as shown
in Figure 6c. All ropes should run to the same side for an even fi t.
Quick links
Figure 6a
L-Bracket
Liner Ridge Tubes
L-Bracket
Quick Link
Gable end
Figure 5e
Turnbuckle
L-Bracket
Venue Mid Eave Liner Cable
Figure 5f
Figure 6b
5