Andersen 46ST FS Manuel du produit - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Andersen 46ST FS. Andersen 46ST FS 8 pages.
Également pour Andersen 46ST FS : Manuel (9 pages)

Imprimer la page

MOUNTING INSTRUCTIONS

Installing the winch is easy, if you follow these instructions. The numbers in ( ) refer to the

position numbers in the parts list.

Tools required for the installation:

• Allen key (4 mm)

• Allen key (5 mm)

• Allen key (6 mm)

• Ø8.5 mm (11/32") drill

• Bedding compound

1. Drill bolt holes Ø8,5mm (11/32") using the winch template.

Be sure that no dust comes in contact with the winch, while drilling.

2. Remove screws (1).

3. Remove self-tailing arm (2) and drum (4).

4. Apply a light coat of bedding compound, ensuring that each bolt hole is bedded.

Keep drain grooves clear.

5. Fasten lower base (19) into place using 5 pcs. M8 (5/16") bolts.

Use large washers or a backing plate.

6. Assemble in reverse order.

7. Check that the winch is functioning correctly:

- The drum should operate smoothly, by turning the drum clockwise by hand.

- The drum must not turn when trying to turn the drum anti clockwise.

- While turning the winch handle clockwise the drum should turn.

- While turning the winch handle anti clockwise the drum should not turn.

PAWL SPRING MOUNTING

Note the curved

spring "arm"

46ST (V.4.1)

50ST (V.1.0)

• 5 x M8 (5/16") countersunk head screws and corresponding

nuts (length depending on deck thickness)

• 5 x large washers or backing plate

• Ring spanner to match nuts

46ST FS (V.4.1.F)

50ST FS (V.1.0.F)