Andersen 46ST FS Manuel du produit - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Andersen 46ST FS. Andersen 46ST FS 8 pages.
Également pour Andersen 46ST FS : Manuel (9 pages)

Imprimer la page

SERVICE INSTRUCTIONS

Tools required for service:

• Allen key (4 mm)

• Allen key (5 mm)

• Screwdriver (small)

1. Remove screws (1).

2. Remove self-tailing arm (2) and drum (4).

3. Remove screws (14).

4. Remove upper base (8), and place it in a safe and comfortable place before dismantling it.

5. Remove drive shaft (5) by using a finger or a winch handle.

6. To release the roller bearing (6), gently insert a small screwdriver between roller bearing

and base plate (8). Remove roller bearing.

7. Remove shafts (12.7, 13.7).

8. Remove and dismantle the two gear units.

9. Clean all parts in benzine. Remember to clean the gear teeth, roller bearing track and

bushing inside the drum (4).

10. Assemble in reverse order. During assemble, by the use of a small soft brush lightly grease

all gear teeth, drive shaft, roller bearing, shafts, pawls, springs and bushings. Pawls should

only be lubricated with a very thin film of ANDERSEN WINCH GREASE. It is very important

that pawls can move freely.

IMPORTANT: When assembling the winch, check the functioning of each pawl by pushing

the pawl against the spring. The pawls should move smoothly and automatically return to

their normal position, where the pawls engage with the teeth. If the pawls do not function

correctly, clean and lubricate the pawls and gears. Check the function of the pawls again to

make sure that it works correctly. If the pawls do not work correctly replace the springs and

recheck the functioning.

Malfunctioning pawls may lead to unexpected release of the winch force resulting in fatal

injuries to the user and others.

Service Kit No: 19 (part. no. 710019) contains spare parts for this winch.

Maintenance instructions for PVD coated stainless steel surfaces.

PVD-coated surfaces should be rinsed regularly in fresh water to remove any salt residue, dirt

or other contaminants and dried gently with a soft cloth. To remove grease or other marks,

a mild abrasive free cleaning agent such as spray-on glass cleaning solution may be used.

No caustic detergents or other aggressive or abrasive cleaning agents

should ever be used, as they may damage the surface.

46ST (V.4.1)

50ST (V.1.0)

• Winch handle

• ANDERSEN winch grease

46ST FS (V.4.1.F)

50ST FS (V.1.0.F)