Anderson Hybrid-X Aperçu de la gamme de produits - Page 2

Parcourez en ligne ou téléchargez le pdf Aperçu de la gamme de produits pour {nom_de_la_catégorie} Anderson Hybrid-X. Anderson Hybrid-X 5 pages.

Hybrid-X start up

1. Remove the tongue and put it at its storage place (close to the steering wheel under the

left fender);

2. Unlock the front gate;

Unlock the front gate;

3. Make sure that the gas tank is full;

4. If the wrapper has the high capacity gas tank, open the valve under the tank and select the

tank with the selector valve (close to the Honda engine);

5. Connect the battery wires;

Connect the battery wires;

6. Start the engine with the green button on the control panel (make sure that the ignition

switch is at ON position and pull out the emergency stop button);

7. If necessary, unlock the steering wheels by removing the lock pin close to the wheel (under

the automatic system);

8. Find out the best wrapping area and put the machine there;

9. With the lifting lever (on the main valve), level the machine to avoid the first bales from

falling;

10 Lower the front gate (with the lever);

10. Lower the front gate (with the lever);

11. Adjust the bale guides enough tight so that the tube has a nice line;

12. For square wrapped bales, raise up the front table rollers (with the handle);

13. For round wrapped bales, let down the front table rollers (with the handle);