Dreamline ENIGMA SHDR-60727912 Series Manuel d'instructions d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Dreamline ENIGMA SHDR-60727912 Series. Dreamline ENIGMA SHDR-60727912 Series 17 pages. Shower door

Imprimer la page

5. Mark the drilling holes on the sill through the

predrilled holes in the Threshold (#15).

Remove the Threshold (#15) and drill holes into the

sill using Ø 5/16" drill bit and insert the Small

anchors Ø5/16" (#18).

Apply silicone on the bottom of the Threshold (#15)

along the center line and around the holes, place it

back to the designated position and fasten it to the

sill with the Countersunk screws ST4.2×30 (#16).

Make certain that the screws are fully countersunk.

See Fig. 5 for details.

6. Attach the Upper guide rail (#03) to the

Stationary glass (#02) with the Glass

brackets (#07) and tighten the bolts into the

pre-drilled holes in the Upper guide rail

(#03). Rotate both of the adjustment disks as

necessary so that the Upper Guide rail (#03)

is even with the glass. (Fig 6.2)

Slide the Door stoppers (#01) onto each end

of the Upper guide rail (#03) and secure

them temporarily using the 4mm allen wrench.

Slide the Guide Rail brackets (#08) onto each

end of the Upper guide rail (#03) and

temporarily secure them as well.

See Fig. 6 and Fig. 7 for details.

"Enigma" Ver.4 Rev.5 02/2016

Ø 5/16"

Fig. 5

Fig. 6

Silicone