ANDI ACIF682 Manuel d'instruction - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ANDI ACIF682. ANDI ACIF682 13 pages. Induction hotplate
Imprimer la page
Fix the hob on the table by screw four brackets on the bottom of hob
(see picture) after installation. Adjust the bracket position to suit for
different table top thickness.
Cautions
1. The induction hotplate must be installed by qualified personnel or technicians.
Please never conduct the operation installation or servicing the unit
by yourself.
2.
The induction hotplate shall not be mounted to cooling equipment, dishwashers
and rotary dryers.
3.
The induction hotplate shall be installed such that better heat
can be ensured to enhance its reliability.
4.
The wall and induced heating zone above the table surface shall withstand
heat.
5.
To avoid any damage, the sandwich layer and adhesive must be resistant
to heat.
Electrical connection
The socket shall be connected according to the relevant standard
or connected to a single-pole cut-out. The method of connection
is shown in Figure (3):
Voltage&frequency
400V 2-N
50\60HZ
220-240V
50\60HZ
220-240V 2+2-N
50\60HZ
Wire connection
1
2
L1
L2
Black Brown
1
2
L
Black&Brown
1
2
L1
L2
Black Brown
Figure (3)
4
radiation
3
4
5
N
Gray&Blue Yellow/Green
3
4
5
N
Gray&Blue
Yellow/Green
3
4
5
N1
N2
Yellow/Green
Gray
Blue