Electrolux SG256N Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux SG256N. Electrolux SG256N 44 pages.

Imprimer la page

www.electrolux.com

7.3 Replacing the lamp

The appliance is equipped with a longlife

LED interior light.

8. INSTALLATION

WARNING!

Refer to Safety chapters.

8.1 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate

class

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only be

guaranteed within the

specified temperature range.

If you have any doubts

regarding where to install the

appliance, please turn to the

vendor, to our customer

service or to the nearest

Service Centre

8.2 Rear spacers

Install the spacers, provided within the

accessory bag, on the brackets of the

condenser (black grill) at the back of the

appliance, as shown in the figure.

Ambient temperature

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Only service is allowed to replace the

lighting device. Contact your Authorised

Service Centre.

8.3 Location

To ensure best performance, if the

appliance is positioned below an

overhanging wall unit, the minimum

distance between the top of the cabinet

and the wall unit must be at least 40 mm.

Ideally, however, the appliance should not

be positioned below overhanging wall

units.

The ventilation space can be:

• directly above the appliance

• behind and above the top cupboard.

In this case, the space behind the top

cupboard must be at least 50 mm

deep.