Andon KD-5905 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Andon KD-5905. Andon KD-5905 16 pages. Fully automatic arm cuff blood pressure monitor

Imprimer la page

DN:KD-5905-SMSY01 V1.0

time and date keeps unchanged.

You can skip RCC Mode by pressing the button "START". Then the monitor

enters the Manual Clock Adjusting mode.

c. Periodical receiving

The monitor will periodically receive the RCC signal every day. You can skip the

receiving process by press the button "START" to enter clock mode.

Manual Clock Adjusting

Normally, the time and date can be adjusted by RCC signal automatically. You can

try manual clock adjusting if no RCC signal or weak signal.

a. While the monitor is in Clock Mode, press the START and MEM button simultaneously,

the monitor enters Manual RCC Receiving mode, then press START button, the

monitor enters manual Clock Adjusting Mode.

b. The year will blink at first.

month, day, hour and minute will blink in turn. While the number is blinking, press the

button "MEM" to increase the number. Keep on pressing the button "MEM", the

number will increase fast.

c. You can exit the Clock Adjusting Mode by pressing button "START" when the number

of minute is blinking, then the time and data is confirmed.

d. The monitor will turn off automatically after 1 minute of no operation.

e. Once you change the batteries, you should readjust the time and date.

3. VOICE SETTING

a. Voice language setting: In clock mode, you can select the voice language by pressing

"VOICE" button. Now LCD will show the current voice language.

represents closing voice function, "L1" represents language 1, "L2" represents

language 2,...,"Ln" represents language n. Press "VOICE" button again to change the

voice language.

b. Voice volume setting: In clock mode, you can change the voice volume by keeping on

press the "VOICE" button. Now the bars on the LCD change and the number of the

bars indicates the volume.

releasing the button when display the corresponding bars.

Picture 3

Press the button "START" repeat, the

See picture 2-3.

See picture 3-1.

You can select the wanted volume by

Picture 3-1

7 / 16

Operation Guide

"L0"

See picture 3.

Template version:1