Electrolux EFA9620 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux EFA9620. Electrolux EFA9620 18 pages.

Imprimer la page

Connection in Ducting Version

When installing the ducting version,

connect the hood to the chimney using

either a ﬂ exible or rigid pipe ø 150 or

120 mm, the choice of which is left to

the installer.

• To install a ø 120 mm air exhaust con-

nection, insert the reducer ﬂ ange 9 on

the hood body outlet.

• Fix the pipe using the pipe clamps 25

provided.

• Remove charcoal ﬁ lters, if present.

Connection in Recycling Version

• Fix the connection 15 to the frame

using the 4 screws provided.

• Fix the ﬂ ange 10 to the lower opening

of the connection 15.

• Connect the hood air outlet to the

ﬂ ange in the lower part of the junction

using a rigid or ﬂ exible ø 150 tube (by

installer's choice).

• Ensure that the charcoal ﬁ lters have

been ﬁ tted.

Chimney assembly / Mounting

the hood body

• Position the upper chimney section

and ﬁ x the upper part to the frame

using the 2 screws 12c (2,9 x 6,5)

provided.

• Similarly, position the lower chimney

section and ﬁ x the lower part to the

frame using the 2 screws 12c (2,9 x

6,5) provided.

Before ﬁ xing the hood body to the fra-

me:

• Remove the grease ﬁ lters from the

hood body.

• Remove charcoal ﬁ lters, if present.

• From below, use the 4 screws 12f

(M6 x 10)provided to ﬁ x the hood

body to the frame.

Installation

ø 150

12c

12f

electrolux 11

ø 120