Atlas DPA-102PM Manuel du propriétaire - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Atlas DPA-102PM. Atlas DPA-102PM 20 pages. Networkable 2-channel power amplifier with dsp
Imprimer la page
DPA-102PM - Networkable 2-Channel
Owner's Manual
Power Amplifier with DSP
Installation and Considerations
Cabling
The DPA-102PM can be used with either balanced or unbalanced sources, provided the proper cabling is used. A balanced line is
defined as two-conductor shielded cable with the two center conductors carrying the same signal but of opposite polarity when
referenced to ground. An unbalanced line is generally a single-conductor shielded cable with the center conductor carrying the signal
and the shield at ground potential.
Balanced Input
Use 20-22-gauge, 2 conductor shielded wire for low level signals. Maintain the proper polarity, + to +, – to – and shield to ground.
Note: The ground center pin of the Phoenix connector is common for both channels.
Unbalanced Inputs
For the RCA inputs pre-made RCA cables can be purchased to simplify interconnection to external devices. For unbalanced signals
using the Phoenix connector connect the (–) pin of the amplifier input to the GND center pin and the (+) pin to positive.
Speaker Outputs
Use 2 conductor unshielded wire of the appropriate gauge. The DPA-102PM is approved for Class 3 wiring.
If you are unsure about this, contact Atlas Sound Tech Support at 1-800-876-3333.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
– 8 –
Specifications are subject to change without notice.