Atlas Copco PHE 6 S Instructions de réparation - Page 9

Parcourez en ligne ou téléchargez le pdf Instructions de réparation pour {nom_de_la_catégorie} Atlas Copco PHE 6 S. Atlas Copco PHE 6 S 18 pages.

Detaching the

Pull the piston (3) from the gear hous-

piston and the

ing (7).

connecting rod

Pull the striker (1) from the piston (3) and

remove the O-ring (2) from the striker (1).

Press the cylindrical bolt (4) from the pis-

ton (3) and pull out the connecting rod (5).

Press out the needle bearing (6) from the

connecting rod (5).

Maintenance

General

It is recommended to submit the machine to maintenance after the carbon brushes have switched off.

Cleaning

Clean all parts – with the exception of the electrical parts – with cold cleaning agent. Caution! No clean-

ing agent should penetrate into the bearing. Clean the electrical parts with a dry brush.

Check for wear

Check the disassembled parts for wear (visual inspection) and replace worn parts.

Electrical tests

Before reassembling, perform an electrical test on all relevant parts (see chapter Electrical and Me-

chanical Test Instructions).

Repair Instructions No.181.03/98

PHE 6 H / PHE 6 S

PAGE