Bose SoundLink Bluetooth speaker III Manuel du propriétaire - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose SoundLink Bluetooth speaker III. Bose SoundLink Bluetooth speaker III 20 pages. Charging cradle
Également pour Bose SoundLink Bluetooth speaker III : Manuel du propriétaire (20 pages), Manuel (2 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (6 pages), Faqs (4 pages), Faq (2 pages)

Bose SoundLink Bluetooth speaker III Manuel du propriétaire
Operation

Adding another device to the speaker

Pair another device to the speaker by making the speaker discoverable.
1.
Press Bluetooth
blinks blue.
2.
On your device, turn Bluetooth on, locate the Bluetooth device list, and select
the device named "Bose SLIII." If your device prompts you for a passcode,
enter "0000" (four zeros).
When the device connects to the speaker, the Bluetooth status indicator turns
to solid white.
Note: You can switch between connecting/connected and discoverable by
pressing Bluetooth on the speaker.

Speaker memory

The speaker can remember up to six paired devices. If you pair the speaker with
an additional device, the device least recently connected is no longer paired with
the speaker.
Note: To clear the speaker memory of all devices, press and hold Bluetooth
(about 10 seconds) until you hear a tone. All devices are cleared and the
speaker becomes discoverable.

Reconnecting a device

When turned on, the speaker attempts to reconnect with a device in memory
starting with the last connected device. If the last connected device is not
available, the speaker connects to the next to last connected device, and so forth.
The speaker searches for a paired device for approximately 30 seconds.

Switching to a different device

You can switch the speaker from your connected device to another previously
paired device. The device you are switching to must be in the speaker memory.
1.
On your previously paired device, make sure Bluetooth is turned on.
2.
Press Bluetooth
The Bluetooth status indicator
is discoverable.
3.
On your device, select "Bose SLIII" from the Bluetooth device list.
The Bluetooth status indicator blinks white, while the speaker attempts to con-
nect to the device.
When the speaker and Bluetooth device have successfully connected, the
Bluetooth status indicator changes from blinking to solid white and the
speaker emits a tone.
10 - English
on the speaker, so the Bluetooth status indicator
®
on the speaker to make the speaker discoverable.
speaker blinks blue to show the speaker