Anova CC400P Manuel du propriétaire - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Anova CC400P. Anova CC400P 14 pages.

Imprimer la page

ENGINE LACKS POWER

1.check air cleaner

2. Check fuel

3.Take engine to an authorized

our servicing dealer, or refer to

shop manual.

Tune up Specifications

ITEM

Spark plug gap

Valve clearance (cold)

Other specificaions

STORAGE

The same petrol must not remain in the tank for more than one month. Thoroughly clean the

mower and store it indoors in a dry place.

ENVIRONMENT

In order to protect the environment, we recommend that the following points should be given special

consideration:



Always use pure unleaded petrol.



Always use a funnel and/or a petrol can with a level control to avoid spillage when refilling the fuel

tank.



Do not fill the fuel tank completely.



Do not overfill with engine oil.



When changing the oil,ensure that all the used oil is collected. Avoid spillage .Take the used oil to a

recycling unit.



Do not dispose of used oil filter in a rubbish bin. Take it to a recycling unit.



Replace the silencer if faulty. When carrying out repairs, always use original spare parts.



Always seek professional help when the carburetor requires adjustment.



Clean the air filter according to directions.



When,after many years of service, your machine needs to be replaced or is no longer required, we

recommend that the machine is returned to you distributor for recycling.

SERVICING

Genuine spare parts are supplied by service workshops and by many dealers. We recommend that

you take the machine to an authorised service station for annual servicing, maintenance and

inspection of safety equipment. For service and spare parts, please contact the dealer where the

machine was purchased.

Possible Cause

Air cleaner elements clogged.

Bad fuel;engine stored without

treating or draining gasoline, of

refueled with bad gasoline.

Fuel

filter

clogged,carburetor

malfunction,

ignition

malfunction, valves stuck, etc.

SPECIFICATION

0.028-0.031 in(0.7-0.8 mm)

IN:0.06±0.02mm

EX;0.08±0.02mm

No other adjustments needed.

Correction

Clean or replace air cleaner

elements(p.9).

Drain

the

fuel

tank

carburetor(p.5). Refuel with fresh

gasoline.

Replace

repair

components as necessary.

MAINTENANCE

Refer to page8.

See your authorized dealer

and

faulty