DS Produkte 06777 Manuel d'instructions - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} DS Produkte 06777. DS Produkte 06777 8 pages. Daylight standing lamp

EN
Before Initial Use
Remove the foils and transport guards and make sure that the
product contents are complete (see chapter "Product contents and
article overview") and check for any damages from transport. If you
identify damages to the components, do not use them (!), instead
contact our customer service centre.
Set-Up
1. Remove the transport protection be-
2. Screw the tube mount (5) fi rmly onto
3. If necessary, undo the locking screw
4. If necessary, pull the cables on the
5. Twist the upper tube (7) onto the
6. Twist the lower tube (7) onto the
7. Join together the two connectors
8. Guide the cables into the tubes
9. Plug the tubes onto the tube mount (5). When you do this, make
sure that the recess for the locking screw on the lower tube (6)
and on the tube mount (5) are above one another.
10. Fix the tubes using the locking screw on the tube mount (5).

Putting Into Operation

1. Place the article on a dry, even surface.
2. Turn the lamp head (1) to the position you want. The lamp can
be infi nitely adjusted using the fl exible lamp neck (3).
3. Insert the mains plug into a properly installed plug socket that
is easily accessible.
4. Switch on the article by moving the On / Off switch (8) to the I
position.
5. To switch it off, move the On / Off switch (8) to the 0 position.
Cleaning and Storage
PLEASE NOTE!
Remove the mains plug from the plug socket before cleaning
the article.
Do not use any corrosive or abrasive cleaners to clean the
housing. They could damage the surface. If needed, clean the
housing with a damp, soft cloth.
Clean the article if necessary using a soft, dry cloth.
Store the article in a dry, clean place that is not accessible to
children and animals.
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
tween the base (4) and tube
mount (5).
the base (4).
from the tube mount (5).
lamp neck (3) through the two exten-
sion tubes. When you do this, make
sure that it is pulled fi rst through the
upper tube (6) and then through the
lower tube (7).
lamp neck (3) to secure it in place.
upper tube (6) to secure it in place.
Make sure that the cables are not
trapped.
(on the base and on the cables in
the tubes). You should feel and hear
them click into place.
which have been screwed together.
Customer Service / Importer:

Troubleshooting

If the article does not work properly, check whether you are able to
rectify the problem yourself. If the problem cannot be solved with
the steps that are listed, contact the customer service department.
Do not attempt to repair a defective electrical device
yourself!
If the article will not switch on, check the following:
Is the mains plug inserted in the plug socket correctly? Correct
the fi t of the mains plug.
Is the plug socket defective? Try another plug socket.
Check the fuse of the mains connection.
Technical Data
Product number:
Model number:
Colour temperature:
Voltage supply:
Power:
Protection class:
Disposal
Dispose of the packaging in an environmentally friendly
manner and take it to a recycling centre.
Dispose of the article in an environmentally friendly manner
at a recycling centre for used electrical and electronic
devices. More information is available from your local
authorities.
All rights reserved.
06777
CF-001M / LED
approx. 5500 K
220 – 240 V ~ 50 Hz
12 W
I
+49 38851 314650 *)
Z 06777 M DS V2 0618
Instructions