aTTo Digital RecLighter Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} aTTo Digital RecLighter. aTTo Digital RecLighter 7 pages.

during the recording. This means that the recorder is in Recording mode.

Press "Mode" button to shift the recording modes from initial

"continuous recording mode" to "voice activated recording mode".

While the recorder is in the Recording mode, press once the Mode button.

The recorder will blink the blue led depending in which mode is already

set (rapidly in voice activated mode and slower in continuous recording

mode). While blue led blinks, press again the Mode button according to

the mode desire to set the device to record. If the light turns off before

pressing the Mode button, press again the Mode button and press again

during those 5 seconds while the blue light blinks. After pressing the

Mode button you can easily check the status of the Recording mode based

on how quick the blue light blinks.

So with RecLighter voice recorder you can choose between 2 recording

modes:

1. Continuous recording mode which is the recorder default working

mode, with a recording quality of 192Kbps. RecLighter will record up to

27 hours (if the battery is full) all sounds/voices on a 15 ft radius

continuously.

2. Voice activated recording mode with a quality recording of 512 Kbps

for a more accurate voice activation system. In this mode it will record

ONLY if sound/voice is detected in the recorder action radius. The

periods of time with complete silence won't be recorded to avoid long

hours of silent recording so, you can listen the footage much easier,

especially those long hours recordings.

IMPORTANT: Once you set the device on Voice Activated Mode, when

the volume of the sound source drops below 40dB, the device will

PAUSES recording automatically. It will record again once a sound over

40dB is detected. The 40 dB is equivalent for a normal voice

conversation in a radius of 10 feet.

Useful tips for understanding the device:

1. The blue light when you activate the CONTINUOUS recording mode

blinks slower than when you activate the VOICE ACTIVATED

recording mode.

2. When the built-in memory is full, the blue light will blink very fast and

shutdown automatically. Please connect the device to PC to delete or

transfer unnecessary files to free some memory of the device, or if you