ATW MINI 8 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ATW MINI 8. ATW MINI 8 18 pages. Air-to-water heat pump

10.2.2 Parameters settings

The menu with a number of parameters that can be viewed, and modiﬁed, if necessary. The current value of the

parameter is displayed. If the parameter is user-editable, a box labelled New is displayed.

Current value

New value

(select to edit)

Current value

Edited value

Parameters that cannot be edited:

- Mode V2

- Maximum temperature of the refrigerant in the heating mode

- Minimum temperature of the refrigerant in the cooling mode

- Mode V1

Editable parameters:

- Time limit - supply water - time during which the HDW tank will be heated.

- Temperature reduction - cooling - how many degrees will the temperature increase during cooling.

- Temperature reduction - heating - how many degrees will the temperature decrease during heating.

- Bivalent temperature - outdoor temperature that causes the outdoor unit shutdown.

- Cooling water temperature - requied water temperature in the cooling mode.

- Power limit - cooling - maximum capacity of the outdoor unit during cooling mode.

- Power limit - heating - maximum capacity of the outdoor unit during heating mode.

- Max. temperature - supply water - maximum temperature in the HDW tank.

- Min. temperature - supply water - minimum temperature in the HDW tank.

- Power limit - supply water - maximum capacity of the outdoor unit during HDW heating.

- Heating water (outdoor +20°) - required heating water temperature at +20°C outdoor temp.

- Heating water (outdoor +12°) - required heating water temperature at +12°C outdoor temp.

- Heating water (outdoor +4°) - required heating water temperature at +4°C outdoor temp.

- Heating water (outdoor -4°) - required heating water temperature at -4°C outdoor temp.

- Heating water (outdoor -12°) - required heating water temperature at -12°C outdoor temp.

- Heating water (outdoor -20°) - required heating water temperature at -20°C outdoor temp.

- Regulation constant - value affecting the communication speed with the outdoor unit.

- Indoor temperature limit - heating - maximum indoor temperature in the heating mode.

- Indoor temperature limit - cooling - minimální indoor temperature in the cooling mode.

Parameters in view mode:

Parameters in edit mode:

Moving up and down

between parameters

Back to the Settings

Changing the value

up and down

Save and return to

the Settings menu