Abt KODT107ESS Manuel d'instructions d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Abt KODT107ESS. Abt KODT107ESS 20 pages. 27" (68.6 cm) and 30" (76.2 cm) electric single and double built-in oven flush installation kit

Imprimer la page

Replace Oven Door(s)

1. Using two hands, grasp side edges of door at the midpoint.

Face the oven cavity.

2. Locate the slots on each side of the oven cavity for the door

hinge locks.

A. Slot in the oven cavity for door hinge lock

3. At a 45° angle, align door hinges with slots in the lower

front of the oven cavity. Slowly insert door, making sure you

maintain the 45° angle. You will know the door is engaged

in the slot when you feel a slight drop.

4. Lower the oven door to the fully open position. If the oven

door does not open to a full 90 degrees, repeat steps 1

through 3.

5. Locate the oven door hinge locks in the corners of the oven

door, and rotate the hinge locks toward the oven cavity to

the locked position.

See Step 3 (illustration A) in the "Remove Oven Door(s)"

section for proper locked position.

6. Close the oven door.

7. When the hinges are properly installed and the door closed,

there should be an even gap between the door and the

control panel. If one side of the oven door is hanging lower

than the other, the hinge on that side is not properly installed.

Repeat the steps to remove, then replace the oven door. See

"Remove Oven Door(s)" and "Replace Oven Door(s)."

Single Ovens

The positioning of the oven feet allows a single oven to be

installed in a recommended cutout height of 28

Go to the "Make Electrical Connection" section in the Installation

Instructions provided with your built-in oven.

Double Ovens

The oven feet need to be installed to allow a double oven to be

installed in a recommended cutout height of 51

NOTE: Do not remove the spacers.

Positioning Oven Feet

A. Spacers

" (72.4 cm).

" (130.6 cm).