Freecast CP07029 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Freecast CP07029. Freecast CP07029 6 pages.

Imprimer la page

INDICATOR DESCRIPTION

Model

LED indicator

WIFI indicator (BLU)

Transmission

CP07029

Low-Battery

Indicator (RED)

WIFI indicator

Receiver

Frequency indicator

CP03029

Battery Indicator

TROUBLE SHOOTING

Malfunction

Failure Cause

The Receiver doesn't power on

The Receiver doesn't connected

to APP device

No Picture

Exception connection between

Signal source and transmitter

Exception of transmitter

Exception of Receiver

Tx / Rx antenna are not erecte

The distance between Tx and Rx

exceed Effective transmission range

Picture is not clear,

with noise and

Solid walls between Tx and Rx

mosaics

Too many obstacles between Tx and Rx

Indicator Status

Status

Connected

Flash Slowly

Waiting for connection

Flash Rapidly

Start WPS coding

Blinking

Low-battery

Connected

Flash Slowly

Waiting for connection

Flash Rapidly

Start WPS coding

The number of blinks indicates

Blinking

the current frequency value

Off

No frequency switching

Red Indicator blinking

Low-battery

Yellow Indicator off

Battery full

Yellow Indicator on

Charging battery

Solution

Power on the Receiver

Connecting receiver to APP

device over Wifi

Check up interface channel between

Signal source and transmitter

Restart the transmitter

Restart the Receive

Keep Tx / Rx antenna erect

Move Receiver closer to the transmitter

Reduce the solid walls between Tx and Rx

Move Receiver closer to the transmitter or

skip the obstacles

SPECIAL NOTICE

1.Although the product has provided the function of data encryption when

transmitting, you still need to pay attention to deliberate signal interception.

There will be the Possibility of a third party intentionally intercept the

transmission signal since the product adopt wireless communication.

Please do not use the product on confidential and important communications,

or life-related communications The main concern is that the content of

wireless communication might be received by the third party's wireless

devices deliberately or accidentally

2. The impact of radio waves (such as the following environment may cause

the abnormal audio and video(blocked image, noise ...etc.).

1 ) Transmit near the wall which is hard for the radio waves to get through.

2 ) Quite close to the refrigerator, metal fitment and appliances,

or next to the crowded situation.

3. This product has been tested and manufactured to comply with national

electrical safety rules, however, there will be noise caused by the

interference with other machines in rare cases. If the interference is

happened, please keep a certain distance away from other machines.

4. DO NOT turn the power on before the antennas are properly installed.

5. Please do not set up the transmitter and receiver in metal shelf,

or it will hinder the wireless communications.

6. It will take 15-20 seconds to boot the system before wireless

communication start, the media receiver can not be operated during this time.

* Since the product's improving process, all the performance,

design and specifications of ourproducts are subject to minor

change without prior notice.

iOS

Android