Audion Sterling Stereo Plus Mk 2 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Audion Sterling Stereo Plus Mk 2. Audion Sterling Stereo Plus Mk 2 10 pages. Sterling power amplifiers 12 & 18 watt

Imprimer la page

Valves/Tubes

You will now need to place the valves/tubes into your Audion. The

Sterling Mark 1 and 2 use a E88CC or 6922 in the left hand side

front and a 5687 on the right hand side front. All Models use either

EL34 or KT88/KT90 valve/tubes in the rear sockets depending on

model ordered

El34 or Kt88

EL34 or Kt88

6922

5687

6922

Audion Sterling Mark 1

Audion Sterling Mark 2

If you have never handled a valve/tube before be careful – they

are similar in properties to a light bulb and just as easily breakable.

In use they can run as hot as a light bulb – SO BE CAREFUL.

The smaller 5687, E88CC or 6922 valve/tube will only fit one way

around into its respective socket. Before inserting check that the

pins are straight and that there is no physical damage to the glass

envelope. A small downward push is all that is needed to insert the

valve/tube make sure that the pins align and that the orientation is

correct.

The larger rear valve/tubes EL34 or KT88. Both valve/tubes, when

viewed from underneath have a notch and will only fit one way into

the socket. Look at the socket and align the valve so that the notch

aligns with the notch on the socket when viewed from above with

the front facing you. A small downward push is required to insert

correctly. Do not use excessive force.

All Audion valve/tubes are dynamically selected and where

applicable are supplied as matched pairs. All are supplied with a

six (6) month return to base warranty.

Revision 1.40 Sterling

- 4 -

Audion International