audiophony 9984 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} audiophony 9984. audiophony 9984 12 pages. 180w battery-operated modular sound system
CROSSER -180W BATTERY-OPERATED MODULAR SOUND SYSTEM
6 - Power management
6 - 1 : Description of the power management system
1 - Indicators: They indicate the charge level from FULL to LOW.
PW indicates the RUNNER is active.
You must change the battery as quickly as possible when the
LOW indicator is lit.
2 - DC Input: Allows you to connect an external DC power supply
unit (24V 2.5A). Please respect the polarity (+ in the middle).
Note about batteries:
Please use the original battery. If need to replace the battery, use a
model with the same characteristics.
Please charge the batteries before using them for the first time. The
RUNNER is designed to charge two batteries at a time.
In order to preserve the batteries, turn the device off when you are not using it.
The battery can be severely damaged it is totally emptied by an inactive system.
Moreover, the batteries must be regularly recharged to prevent it from drying.
The batteries are considered wearing parts and are not covered by the warranty.
6 - 2 : Replacing the CROSSER batteries
Red
2
Notes :
- Caution: Please make sure to position the batteries properly, as described on Figure 2, as your device can be
damaged by an improper positioning.
- New batteries must be fully recharged before being used. The green indicator flashes during the charging
process and the FULL indicator remains lit when the battery is fully charged.
Black
1
1 - Turn OFF your CROSSER.
2 - Open the rear access hatch as
described on Figure 1.
3 - Remove the used batteries.
LINE IN
4 - Install the new batteries in their
compartment.
ON
WIRELE
PRIORI
SS MIC.
TY
OFF
5 - Position the batteries as described on
Figure 2.
6 - Make sure the battery is in position and
close the hatch.
English
2
1
Page 9