audiopraise VanityPRO Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} audiopraise VanityPRO. audiopraise VanityPRO 19 pages.
Imprimer la page
Audio Meters
For quick overview of the audio signals presence and incoming audio signal levels, the
Vanity
PRO
features an 8-channel audio level meter. Each channel has a dedicated meter with the
range from 0dBFS down to -48dBFs and tri-colour grade. The channel names are coded with
standard abbreviations. The additional names in the brackets follow the naming convention of the
CEA-861-D standard.
FL – Front Left
•
FR – Front Right
•
C – (Front) Center
•
LFE – Low Frequency Effect
•
SL – Surround (Rear) Left
•
SR – Surround (Rear) Right
•
SBL – Surround Back (Rear Center) Left
•
SBR – Surround Back (Rear Center) Right
•
Audio Meters screen and prototype showing the colour-grading of the meters
System Status
This screen shows the overall system status, health, and operational parameters.
PRODUCT: This section shows the product related information, such as serial number, hardware
version and firmware (SW) version. Information from this section should be always provided when
support is required.
POWER: Shows internal voltage measurements of various
voltage rails and Audio side power input current.
AUDIO: Shows various audio parameters which are available
in the home screen as well as oscillator selection, oscillator
control voltage and audio buffer utilization.
HW: Shows internal health checks for the key components –
HDMI interface, FPGA, and the screen.
HDMI: Shows the ID information and status of the HDMI
interface.
Page 15 of 19
– User Manual v1.2
Vanity
PRO