Apollo Xpander XPA-CB-14002-APO Manuel de mise en service - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de mise en service pour {nom_de_la_catégorie} Apollo Xpander XPA-CB-14002-APO. Apollo Xpander XPA-CB-14002-APO 19 pages. Diversity loop interface module
Également pour Apollo Xpander XPA-CB-14002-APO : Manuel de mise en service (14 pages)

Imprimer la page

Apollo Xpander XPA-CB-14002-APO Manuel de mise en service

Logon procedure

Ensure batteries are installed correctly and fit the battery jumper (shown below) across both header pins.

Note: The XPander Combined Sounder (Visual Indicator) uses a DIL switch to connect the battery supply.

XPander Sounder and

Sounder/Beacon

Push the rotary select switch on the interface and release. Turn until "add new device" is shown on the menu and

push to select. On the device press the log-on button (shown below) for two seconds. A LED on the device will

flash.

Detector and Sounder logon button

PRESS HERE TO

LOGON

A five-figure code will be displayed on the interface similar to below. This is the XPander device's unique ID.

Turn the rotary select switch to 'Yes' and push to select. The menu will return to 'add new device'.

Check the device's unique ID against the ID on the label of the product to ensure that it matches.

Repeat steps to add more devices.

Press the 'Back' button on completion to return to the previous menu.

XPander MCP

XPander Detector

Base Module

MCP logon button

Input Output Unit logon button

CLOSED

F-SAFE

LED

ENABLE

FAULT

INPUT 1 INPUT 2

OUTPUT 1

OUTPUT 2

XPander Combined Sounder

XPander

I/O Unit

Combined Sounder and Detector logon button