Aponorm BASIS PLUS BLUETOOTH Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Aponorm BASIS PLUS BLUETOOTH. Aponorm BASIS PLUS BLUETOOTH 19 pages.

Imprimer la page

Clearing all values

If you are sure that you want to permanently re-

move all stored values, hold down the M button

(the monitor must have been switched off before-

hand) until «CL ALL» («CL ALL» = Clear All) appears

and then release the button. To permanently clear

the memory, press the M button while «CL ALL» is

flashing.



Aborting the deletion:

Simply press the On/off button

while «CL ALL» is flashing to abort the

deletion.



I t is not possible to clear individual readings.

5. Battery indicator and battery

change

Batteries almost flat

When the batteries are approximately 3/4 empty,

the partly filled battery symbol

as the device is switched on. Although the monitor

will continue to measure reliably, you should obtain

replacement batteries.

Batteries flat - replacement

When the batteries are flat, the empty battery sym-

bol

will flash as soon as the device is switched

on. You cannot take any further measurements and

must replace the batteries.

again

will flash as soon



In the event of a battery change or power

failure, the memory retains all values mea-

sured; the date and time must, however, be

reset. This is indicated by the year indicator

flashing.

For changing the batteries and resetting the date/

time please follow the instructions in Section 1 on

page 6.

Which batteries and which procedure?



Please use 4 new, long-life 1.5 V, size AA

alkaline batteries.



Do not use batteries beyond their date of

expiry.



If the monitor is not going to be used for a

prolonged period of time, the batteries must

be removed.

Using rechargeable batteries

You can also operate this monitor with recharge-

able batteries.



O nly use «NiMH» type reusable batteries.



W hen the flat battery symbol appears,

remove the batteries and recharge them.

They must not remain in the monitor as they

may become destroyed (exhaustive discharge

due to low consumption of the monitor even

when switched off).