Addvent AVAC12000 Instructions d'installation et manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel de l'utilisateur pour {nom_de_la_catégorie} Addvent AVAC12000. Addvent AVAC12000 20 pages.

Imprimer la page
NOTE
1. This efficiency feature by adding water is proposed to do after one
hour operation and the water should NOT be over 2.5L, otherwise,
the "water full" indicator will light in red and the unit will stop
working. ✩ This action should only be performed while the power
is on, in order the "water full" alarm could work, also please pay
attention on the water level of the see-through window beneath the
water gate.
2. In case the "water full" indicator is in red, please drain the water
from the drain point at the back side of the unit until the red light
goes out. The unit should work again now.
IMPORTANT!
1. To prolong the compressor's life, after switch-off of the unit, please wait for
3 minutes (at least) before re-switch.
2. The cooling system will switch off if the ambient temperature is lower than
the set one. The ventilation, however, keeps working on the set level. If the
ambient temperature rises above the selected level, the cooling will return
to work.
3. This machine is equipped with ANTI-FROST function. While using the
heating function during low temperature, sometimes the heating will stop
for a while in order to melt the frost. As this occurs, just wait for the heating
returns to work.
14