Datalogic MAGELLAN 8400 Manuel de démarrage rapide - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Datalogic MAGELLAN 8400. Datalogic MAGELLAN 8400 18 pages.
Également pour Datalogic MAGELLAN 8400 : Fiche de référence rapide (2 pages)
Imprimer la page
PRESS
DURATION
Momentary (when
scanner is in Sleep
Mode)
Momentary (when
scanner is in Normal
Operating Mode)
Hold, then release
when the beeper
sounds
4 Seconds
8 Seconds
a. By standard default, this function is normally disabled to prevent accidental activation by users.
b. Users should not perform scanner resets except under the direction of trained systems support person-
nel.
Quick Reference Guide
Volume/Tone Push Button
The Volume/Tone Push Button also performs multiple functions depend-
ing upon the duration of time it is pressed:
Table 2. Volume/Tone Push Button Functions
FUNCTION
Wakes scanner from
Sleep Mode
Increments volume
Increments tone
Scanner Diagnostics
a
Mode
b
Resets Scanner
Alternatively, the scanner can be awakened by:
- Moving an object through the scan zone.
- A weight change on the scale.
- Scanning with an attached auxiliary scanner.
Press the push button momentarily to increase speaker vol-
ume. When the loudest volume is reached, a repeated press
of the push button cycles volume back to the lowest setting,
then volume increases on subsequent press(es). Four vol-
ume levels are available.
Press the push button for approximately 2 seconds, then
release. Each time this is done, the beeper will sound at one
of three tones. Stop when the desired tone (high, medium or
low) is sounded.
This mode allows system support personnel to troubleshoot
problems with the scanner. Generally diagnostics are initiated
after noting a Field Replaceable Unit (FRU) Warning (see
). Cycle power to exit Scanner Diagnostics Mode.
Table 1
Only system support personnel should perform a reset.
COMMENT
5