Datamaster T0046 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Datamaster T0046. Datamaster T0046 19 pages. Professional lan cable tester

Imprimer la page

Datamaster

T0046 Professional LAN Cable Tester – User Guide

TEL MODE – Cable Selection

Tests can be performed for either 6, 4 or 2 conductor cables. Two 8P to 6P Modular

Reducers are included to ensure correct cable plug mating with the testers' modular sockets.

The Remote Terminator cannot be used in the TEL Mode.

Enter TEL Mode from either the main menu on the screen or by pressing the blue coloured

button.

TEL

The initial TEL MODE screen is shown

opposite and is set for a 6 conductor cable.

Use the

UP / DOWN NAVIGATION

toggle between the 6, 4 & 2 conductor

modes (see screenshots below for the 4 and 2

conductor modes).

TEL MODE

The TEL Mode is capable of testing for the following faults:

•

Open circuit

•

Short circuit

•

Crossed wires

Connect the cable between the MAIN and LOOPBACK

sockets as shown in the diagram opposite using a modular

reducer if required.

Press the

TEST

The display will indicate a PASS and the type of cable

connected if there is no fault.

If there is a FAIL due to a Open-circuit, Short or Cross fault,

the applicable wire pair(s) will blink).

keys to

button.

Page 9