ADE R15 Series Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ADE R15 Series. ADE R15 Series 8 pages. Mechanical round dial weighing scales

Imprimer la page

Adjusting the damper

The damper should be adjusted while it is on the grooved wheel on top of the piston rod. If you

notice that the pointer moves faster, turn the wheel clockwise. If you notice that the pointer

moves slower, turn the wheel counter-clockwise.

Levelling the scale

Align the scale using the support feet. Make sure that the air

bubble of the spirit level is centred in the black frame.

Potential taring

When the spirit level is set precisely as described above, the pointer should be at zero.

Otherwise, make sure to tare the scales as described below:

Below the weighing surface and the load cross there is a compartment with lead shot. Remove

the weighing surface from the load cross, loosen the load cross and lift it off. If the pointer is at

the "PLUS" dash (above zero), remove some lead shot; if the pointer is at the "MINUS" dash

(below zero), add some lead shot. Practise a little bit to know exactly how much should be

added or removed. Finally, re-assemble the load cross and weighing surface.

Locking up

The scales should always be transported with the dial mechanism locked in

place. To lock up the scales dial, push the black locking handle into the

horizontal position. When transporting the scales over longer distances, make

sure to close the oil damper by pushing down the rubber plug to prevent leakage

of damping oil.

Cleaning

The scales should be cleaned when unloaded. Do not use any aggressive cleaning agents

while cleaning, but only a damp cloth or conventional disinfectants.

Make sure that no liquid enters the device!

Storage and Transport Conditions

Keep all parts of the packaging in case you need to return the shipment to avoid possible

damage during transportation.

Care and maintenance

R15-R30-210409-Rev006-UM-en