Airwheel R6 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Airwheel R6. Airwheel R6 12 pages.

Adjustment and maintenance:

1.
Newly purchased vehicles should be adjusted in good condition, if there is any question, please refer to the
aftersales staff.
2.
The adjustment method of the brake is the same as the ordinary bicycle. The key is not only to be able to brake
effectively, but also to release the brake without block (otherwise it will consume a large amount of electric energy)
and make sure the brake-power off function is effective.
3.
To replace tires, it is the same as ordinary bicycle. Due to the rear wheel hub and circuit, riders need to pay
attention to the lines and press the two screws in the rear axle. The torque of the rear wheel is recommended
≥ 30N.m, the front wheel ≥ 18N.m.
4.
Have a maintenance and a comprehensive examination every 800 km. check whether the front and rear wheel
screw is locking, check whether the pattern of cover tyre is worn; check whether the tire pressure is appropriate,
the drive system is smooth, and each part of the joint is normal: check whether the brake line zip-fastener is used
in lubrication. And inject suitable amount of lubricant to the central axis, the front axle, rear axle, flywheel, fork,
rotating parts and brake wiring. 40# oil and butter as a lubricant are recommended.
5.
In the use and maintenance, if you find that you cannot solve the problem, please contact the aftersales staff.
Unauthorized demolition of Airwheel caused the failure and damage, is not in the company's free warranty.
6.
When the vehicle is used for a period of time, it should be requested professional or designated service station for
a comprehensive inspection and adjustment to ensure the comfort, safety and normal service life.

Chain adjustment:

Rotate to loosen the nuts. Adjust the nut forwards or backwards to find the suitable looseness. When adjusting the
chain, it must also be aligned with the rear nut and adjusting nut and keep the front and rear wheels in a straight line.
After adjustment, refasten the nut in the rear wheel, lock the adjusting nut to have a final check. The chain sag between
the two chain wheels should be 10~15.
The right side of the bike

Battery usage:

1.
Auxiliary charge: such as short delivery time, users can directly use the battery.If the delivery time is longer (2 months
or longer), the battery will lose power during storage and transport. It is better to charge the battery before use. To
charge it requires plugging the exclusive charge to the battery charging hole and connecting AC220V power source for
2~4 hours until the charger is full.
2.
The normal charge of the battery: the operation of R6 is also the discharge process of the battery. The battery should
be charged immediately after the use of the power-assisted vehicle.
3.
Please turn off the power if not riding.
4.
The connectors of the battery box should be fixed tightly according to the requirements (the battery box connecting line
has been reliably connected before ex-factory). Loosened or wrong connection will cause the related parts abnormal
and lead to serious damage.
5.
Lithium batteries can not be close to open fire or high temperature heat source, can not be thrown into water and can
not be exposed in the sun in high temperature season.
6.
Do not disassemble and decompose, as the internal part of them lithium battery has been packaged intactly.
7.
The waste lithium battery of the product is to be recycled by the enterprise or dealer, and the government designated
outlets. Please do not throw away the waste battery, so as not to pollute the environment.
Charger usage:
1.
Carefully check whether the charger's rated input voltage (AC220V) and the grid voltage is consistent.
2.
When the vehicle needs charging,first connect the battery to the charger, and then connect the charger to AC power
source.The charging indicator is red meaning it is charging. When it turns green, it will take 15 minutes to be fully
charged. The charging time is about 2-4 hours (depending on the quantity of remaining battery).
Adjusting nut
- 08 -
Rear nut
The left side of the bike