Gaggenau AW 210 Manuel d'utilisation et d'assemblage - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'assemblage pour {nom_de_la_catégorie} Gaggenau AW 210. Gaggenau AW 210 20 pages.

300

310

230

76,5

270

405

103

160

min. 600 electric

mind. 600 Elektro

min. 650 gas

mind. 650 Gas

Fig. 19

Fig. 20

Important: before marking the securing holes,

make sure that no electricity or water lines or

other lines are laid at the drilling points in the wall.

Proceed as follows:

– From the bottom edge of the hood, mark a center

line on the wall.

– With the aid of the drilling template, mark the

positions of the screws on the wall (Fig. 19).

– Pay attention to the minimum clearance of 600 mm

for electric cookers and 650 mm for gas cookers.

The bottom edge of the template corresponds to

the bottom from edge of the hood.

– Using the drilling template, drill the 6 holes for

the hood (area I of the drilling template) and the

two holes for suspending the chimney (area II of

the drilling template). In the top two securing

holes for the hood, fix the two hooks d with the

countersunk screws c. Make sure that the hooks

lie flatly on the wall. In certain circumstances you

may have to countersink the drill holes. Fit the

included dowels a in the other drill holes.

Note: pay attention to any special accessories that

you may have to fit.

– Screw on the retaining bracket for the chimney

paneling.

– Detach the grease filters.

– Hang the hood on the two hooks. Adjust the

suspended element with the recessed head

screw and align the hood using a spirit level

(Fig. 20).