Automationdirect.com Productivity 1000 P1-04THM Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Automationdirect.com Productivity 1000 P1-04THM. Automationdirect.com Productivity 1000 P1-04THM 8 pages. Analog input

Automationdirect.com Productivity 1000 P1-04THM Manuel

General Specifications

Operating Temperature
Storage Temperature
Humidity
Environmental Air
Vibration
Shock
Field to Logic Side
Isolation
Heat Dissipation
Enclosure Type
Module Location
Field Wiring
EU Directive
Connector Type (included)
Weight
Agency Approvals
*See CE Declaration of Conformance for details.
2
www.productivity1000.com
0º to 60ºC (32º to 140ºF)
-20º to 70ºC (-4º to 158ºF)
5 to 95% (non-condensing)
No corrosive gases permitted
IEC60068-2-6 (Test Fc)
IEC60068-2-27 (Test Ea)
1800VAC applied for 1 second
100mW
Open Equipment
Any I/O position in a Productivity1000 System
Removable terminal block (Included). The
P1-04THM is not compatible with the ZIPLink
Wiring System.
See the "EU Directive" topic in the Productivity
Suite Help File. Information can also be obtained at:
www.productivity1000.com
10-position Removable Terminal Block
58g (2.0 oz)
UL 61010-2-201 file E139594, Canada & USA
CE (EN61131-2 EMC and EN61010-2-201 Safety)*
Voltage Input Specifications
Linear mV Device Input Ranges
Max Voltage Input Offset Error
Max Voltage Input Gain Error
Max Voltage Input Linearity Error
Max Voltage Input Impedance
Configuration/Diagnostics
Burn-out Detection: High Side/Disable
°C/°F (T/C Only)
Module Diagnostics Failure
Burn-out (on if T/C input is open –
no connection between TCn+ and TCn-)
Channel Under-range (T/C only)
Channel Over-range (T/C only)
Terminal Block Specifications
Part Number
P1-10RTB
Positions
10 Screw Terminals
30–16 AWG (0.051–1.31 mm²)
Solid / Stranded Conductor
Wire Range
3/64 in (1.2 mm) Insulation Max.
1/4 in (6–7 mm) Strip Length
Use Thermocouple Extension wire for thermocouples.
Conductors
"USE COPPER CONDUCTORS, 75ºC" or equivalent.
Screw Driver
Screw Size
M2
Screw Torque
2.5 lb·in (0.28 N·m)
*Recommended Screw Driver TW-SD-MSL-1
Tech Support 770-844-4200
0–39.0625 mVDC,
±39.0625 mVDC,
±78.125 mVDC,
0–156.25 mVDC,
±156.25 mVDC,
0–1250 mVDC
0.05% @ 0°–60 °C, typical 0.04% @ 25°C
0.06% @ 25°C
0.05% @ 0°–60 °C, typical 0.03% @ 25°C
0.2% @ 0°–60 °C, typical 0.06% @ 25°C
1 bit per module
1 bit per module
1 bit per module
1 bit per channel
1 bit per channel
1 bit per channel
P1-10RTB-1
10 Spring Clamp Terminals
28–16 AWG (0.081–1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Max.
19/64 in (7–8 mm) Strip Length
0.1 in (2.5 mm) Maximum*
N/A
N/A