Autonics BD-100 Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Autonics BD-100. Autonics BD-100 14 pages. Laser displacement sensors
Également pour Autonics BD-100 : Manuel du produit (6 pages), Manuel du produit (5 pages)

Imprimer la page

BD Series

▣ Installation Precautions

For stable measurement, mount the sensor head by referring to the below items.

◎ Moving object measurement

1. Object with material / color difference

2. Rotating object

3. Object with step

◎ Narrow area or concave object

◎ Wall mounting

◎ Black object

E-14

When measuring black object with low reflectance the amount of light received

decreases, install the sensor head closely to the object.

Install the emitter and receiver in parallel to the material or

color boundary of the object.

Install the receiver and the rotating shaft in parallel to minimize

the influence of fluctuations and position deviations.

Install the emitter and receiver vertically to the line between crest and

valley of the object.

Install the sensor head where the reflected laser beam does not

blocked toward the receiver part.

Install the sensor head where the reflected laser beam from the wall

does not enter the receiver part.

If the color of wall is black with low reflectivity and no gloss, the error

can be minimized.