Autonics BJ15M-TDT-C-P Manuel du produit - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Autonics BJ15M-TDT-C-P. Autonics BJ15M-TDT-C-P 5 pages. Rectangular photoelectric sensor
Imprimer la page
Sold Separately: Reflector MS Series
Appearance
Size (W × H)
40.5 × 60.5 mm
81.5 × 60.5 mm
29.3 × 38 mm
15.4 × 24 mm
13.7 × 23 mm
• Material: PMMA / ABS (front part / rear part)
• Installation: Bolt mounting
■ Dimensions
MS-2□
2-Ø3.8
2.5
34
3.25
8.5
40.5
MS-4
2-Ø3.2
20
2
29.3
7.5
MS-5
2-Ø2.2
11.4
2
2
15.4
9.5
■ Cautions during Installation
• Select a reflector size that is suitable for the installation space and operating
environment of the sensors.
• In general, a bigger size of the reflector results in a longer sensing distance.
• Reflectors with high reflectivity increase the sensing distance compared to typical
reflectors.
• The reflectance may vary depending on the operating environment for the sensors.
Reflectance
Sensing type
Typical
Retroreflective
reflectivity
Typical
Polarized
reflectivity
retroreflective
High
Polarized
reflectivity
retroreflective
Typical
Retroreflective
reflectivity
High
Polarized
reflectivity
retroreflective
Typical
Retroreflective
reflectivity
Typical
Retroreflective
reflectivity
Typical
Retroreflective
reflectivity
MS-3□
3.4
40.8
4-Ø3.8
3.4
34
40.8
81.5
MS-6
4
2
9.7
2-Ø2.2
1.4
13.7
4.8
Sold Separately: Retroreflective Tape MST Series
Model
Appearance
MS-2
MS-2A
MS-2S
MS-3
MS-3S
MS-4
• Material: PMMA / PC / Acrylic (surface film / prism layer / adhesive layer)
• Ambient temperature: -35 to 65 ℃ (temperature for adhesion: 10 to 30 ℃)
• Installation: Tape cutting (installation distance: ≥ 20 mm )
■ Reflectance of MST Series
MS-5
Series
BTS
BM
BMS
MS-6
BEN
BX
BJ
BJR
BJX
BH
(Unit: mm)
BEN
BX
BRQ
BRQP (plastic material type)
BRQPS (side sensing type)
■ Dimensions
A
2.5
8.5
■ Cautions during Installation
• Select a retroreflective tape that is suitable for the installation space and operating
environment of the sensors.
• In general, a bigger size of retroreflective tape results in a longer sensing distance.
• Be sure to check the reflectance of the MST series for proper use.
• The reflectance may vary depending on the operating environment for the sensors.
• Before applying the tape, clean the adhesive side of the reflective tape with a dry
cloth.
• Do not press or damage the surface of the retroreflective tape.
• Regularly clean the tape to maintain optimal performance, using only neutral
detergents. Do not use chemical solvents.
Size (W × H)
Approval Packaged unit Sensing type
50 × 50 mm
ᜫ
10
100 × 100 mm
ᜫ
5
200 × 200 mm
ᜫ
2
Sensing type
MST-50-10
95%
70%
90%
Retroreflective
90%
90%
40%
35%
35%
60%
Polarized
70%
retroreflective
30%
40%
40%
25%
0.38±0.02
Model
MST-50-10
MST-100-5
MST-200-2
Model
• Retroreflective
• Polarized
MST-50-10
retroreflective
• Retroreflective
• Polarized
MST-100-5
retroreflective
• Retroreflective
• Polarized
MST-200-2
retroreflective
MST-100-5
MST-200-2
100%
100%
110%
170%
120%
190%
130%
140%
100%
110%
60%
100%
45%
55%
45%
55%
80%
140%
90%
120%
40%
60%
50%
80%
80%
85%
30%
35%
(Unit: mm)
A
□ 50
□ 100
□ 200