Autonnic A5024 Manuel d'utilisation et d'installation - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Autonnic A5024. Autonnic A5024 19 pages. Fluxgate compass
Imprimer la page
5.2.10
This command is to read the calibration table values and the response is
in the form of the example shown below:
$TCF0,0000071C0E381554
$TCF1,1C70238C2AA831C4
$TCF2,38E03FFC47184E34
$TCF3,55505C6C63886AA4
$TCF4,71C078DC7FF88714
$TCF5,8E30954C9C68A384
$TCF6,AAA0B1BCB8D8BFF4
$TCF7,C710CE2CD548DC64
5.2.11
Internal filter response
Where nn is the damping value within the range 0 to 99
5.2.12
$PATC,IIHDG,RHO,nnn.n<CR><LF>
Where nnn.n is the heading offset Note that leading zeros are suppressed
eg 0.0
5.2.13
Request the serial number:
A special proprietary reply sentence follows:
$PATC,IIHDG,RID,ssss<CR><LF> where ssss is the serial number in
ASCII decimal.
5.2.14
Read device firmware release
A typical response from a unit is as follows:
$SR,A5024,016,02<CR><LF>
showing the release is 016.
$PATC,IIHDG,RCV<CR><LF>
$PATC,IIHDG,RHD,nn<CR><LF>
$PATC,IIHDG,RHO<CR><LF>
$PATC,IIHDG,RID<CR><LF>
$SR <CR><LF>
18 of 19
A5023/24