adesto SM2400-EVK2 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} adesto SM2400-EVK2. adesto SM2400-EVK2 16 pages. Serial-2-plc adapter

Imprimer la page

107

Delimiter.

0: SOF no response

1: SOF w/ response

2: ACK

3: NACK

108

On/Off mode.

1: enable

0: disable

109

Band select; XR-specific setting

110

SubCarriers; 4 decimal concatenated numbers, e.g. set of subcarriers "30 40 50 60" is encoded as 30405060.

111

FCC enable (XXR protocol).

1: enable

0: disable

4.3 Supported Baud Rates

Table 4 defines baud rates, which can be applied to UART using ATS command with register number 37 (conven-

tional register for setting the baud rate).

Example:

ATS37 = 14: baud rate set to 57600

ATS37 = 16: baud rate set to 230400

4.4 Factory Defaults

Following are the default PLC parameters with ASCII pass-through or TP pass-through firmware, which are acces-

sible for modification via AT commands in ASCII pass-through variants.

Table 3. Supported AT Registers (continued)

Table 4. Supported Baud Rates

Mode

0 through 4

7 and 8

10 and 11

Note: These higher baud rates might not be standard allocations

Baud Rate

600

1200

2400

4800

9600

14400

19200

38400

57600

115200

230400

375000

625000

SM2400 Serial-to-PLC Adapter User's Guide

UG-SM2400–-177A–-02/2019