Majacraft Pioneer X Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Majacraft Pioneer X. Majacraft Pioneer X 11 pages.

6. Crank Assembly

Required:

Crank assembly

3 - Silver M5x20mm (3/4") bolts (in the hardware

bag)

3mm Allen key

The drive wheel has been predrilled with the holes which line up with the holes on the crank

assembly. Make sure the drive belt is on before starting!

Similar to the base/stem assembly process, do not

fully tighten the centre bolt until you have aligned

and started screwing in the two bolts on the sides.

Align the holes on the drive wheel with the holes in

the crank assembly and screw it into place using the

3mm Allen key. It is recommended that you insert

the centre bolt first. This will reduce your chances of

possibly scratching your drive wheel.

When the three bolts are all in place, you can finish

tightening them up.

majacraft