Major Manufacturing ADAMS RITE 4501 Series Manuel d'instructions - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Major Manufacturing ADAMS RITE 4501 Series. Major Manufacturing ADAMS RITE 4501 Series 10 pages. Lip strike template

Imprimer la page

This is the area you did not cut through in the

step above. Adjust the depth of the router to

cut the thickness of the jamb material only,

this should be a cut depth of only about 1/8

inch. Use the router to nibble away this area.

Remove the router template , clean off the

lube and de-burr the sharp edges with a

scraper or a file.

Drill out the holes left by the tek screws to

3/16". These holes will be used to mount the

factory mounting bracket.

Page 8