IKEA NUTID OV 9 Manuel d'instructions - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} IKEA NUTID OV 9. IKEA NUTID OV 9 32 pages. Built-in oven
Également pour IKEA NUTID OV 9 : Manuel de l'utilisateur (20 pages), Manuel de l'utilisateur (26 pages), Manuel de l'utilisateur (12 pages), Instructions (4 pages), Feuille de description du produit (4 pages), Manuel d'instruction (20 pages), Manuel (20 pages)

Imprimer la page

ENGLISH

7. At the end of the set time, the oven

automatically switches off,

appears on the display and a buzzer

sounds.

"Pyrolysis" function

1. Turn the knob A to the Pyrolysis

automatic cleaning function and for

2 seconds the display will show CLn

(cleaning); the selector will automatically

set a minimum duration of 1:30.

2. To modify the automatic cleaning cycle

duration, use the "+" "-" buttons. The

maximum programme duration is 3

hours.

To set the end of the pyrolysis cycle,

proceed as follows:

1. Press the "set" button to set the end of

pyrolysis duration. The indicator q next

to the symbol

2. Set the end of the pyrolysis cycle with the

"+" "-" buttons.

3. Press the "ok" button to confirm the

end of pyrolysis duration. The oven will

switch on automatically at the end of the

pyrolysis cycle minus the cycle duration

(previously set). The indicators q above

the symbols

4. To increase the pyrolysis duration, press

the "set" button and set the new cycle

duration with the "+" button.

5. Confirm with the "ok" button. At the end

of the set time, a buzzer sounds and the

display will show

6. Press "ok" to stop the buzzer.

7. Turn the knob A to "0": the time will

reappear on the display.

Timer

The timer can only be used when the oven is

not in use and allows a maximum time of 6

hours to be set.

To set the timer:

1. Leave knob A turned to "0". The display

shows the time of the day.

2. Press the "set" button. the indicator q

lights up next to the symbol

lights up.

light up in succession.

. Use the

"-" or "+" buttons to set the required

time.

3. Press the "ok" button to confirm the

selection. At the end of the set time: A

buzzer sounds and

display.

Press the "ok" button: the buzzer stops.

The time of day reappears on the

display.

Child Safety (Lock)

1. After turning the knob A to "0", press

the "-" and "+" buttons together for 3

seconds.

Note:

Activation of the LOCK function is indicated

by an acoustic signal, whereas the symbol

appears on the display.

Once set, the display will continue to

indicate the time.

2. The oven functions cannot be used after

Safety Lock activation.

3. To deactivate the lock, repeat the

sequence described in point 1.

flashes on the