ENGLISH
To deactivate the function at any time
during the countdown, repeat the
procedure until the Drinks Chill icon turns
off.
Fan cooling
The refrigerator compartment is equipped
with a device that allows for a rapid cooling
of foods and more uniform temperature in
the compartment.
The activation of the fan cooling
function increases the energy
consumption.
1. Press OK (several times if necessary)
until the corresponding icon appears.
The fan indicator flashes for a few seconds.
2. Press OK to confirm.
The fan indicator is shown.
To switch off the function repeat the
procedure until the fan indicator goes off.
If the function is activated
automatically, the fan indicator is
not shown (refer to 'Daily Use').
High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
First use
Cleaning the interior
Before using the appliance for the first time,
the interior and all internal accessories
should be washed with lukewarm water
and some neutral soap to remove the
typical smell of a brand-new product, then
dried thoroughly.
an earlier power failure or door is open) is
indicated by:
• flashing the alarm and freezer
temperature indicators;
• sounding of buzzer.
To reset the alarm press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a few
seconds. Then show again the set
temperature.
The alarm indicator continues to flash until
the normal conditions are restored, then it
goes off.
Door open alarm
An acoustic alarm will sound if the door is
left open for a few minutes. The door open
alarm conditions are indicated by:
• flashing alarm indicator;
• acoustic buzzer.
When normal conditions are restored (door
closed), the alarm will stop. During the
alarm, the buzzer can be switched off by
pressing any button.
Caution! Do not use detergents
or abrasive powders, as these
will damage the finish.
13
Imprimer la page