CEO Tech 50710 Manuel d'utilisation et d'entretien - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} CEO Tech 50710. CEO Tech 50710 9 pages. Fixed led / lcd tv wall mount

Imprimer la page

Pre-Installation

PLANNING INSTALLATION

Compare all parts in the package with the Hardware Included and Package Contents lists in this manual. If any part

is missing or damaged, do not install this wall mount system and call customer service at 1-877-527-0313 or visit

www.HomeDepot.com.

PLANNING WALL PLACEMENT

CAUTION:

weight-bearing wall. Failure to observe this

precaution can result in serious physical

injury and/or property damage. Consult a

professional installer or contact customer

service if you have any questions.

When selecting a wall to mount your display, keep the following in mind:

□ Select a place with easy access to power outlets, cable input sources, and connections for speakers and

accessories.

□ Avoid direct sunlight, heat, and vibrations and do not place in direct flow of traffic.

□ Select a weight-bearing wall. The wall must be able to safely support four times the combined load of the

equipment and all attached hardware and components.

PLANNING MOUNTING HEIGHT

The optimal viewing height is to center the display at eye level when seated. Many people consider this to be too low

for a wall mount, and commonly use the following rule for placement.

□ Position the bottom of the display no higher than eye level when seated, and the top of the display no higher

than eye level when standing. Anything within these limits should normally provide a comfortable viewing

experience.

ENSURING WALL STABILITY

Carefully inspect the wall area you have selected. Examine the wall surface before you begin drilling.

WARNING:

CAUTION:

□ For concrete walls, check for damaged or loose concrete and do not drill in those areas.

□ For brick wall, never drill into the mortar between blocks.

□ For wood studs, locate the wall studs and drill in the center of the stud.

TOOLS REQUIRED (NOT INCLUDED IN THE PACKAGING)

Power drill

Stud finder

Ensure the wall you select is a

Do not drill near electrical wiring and water pipes.

Wood studs must be no smaller than 2 x 4 in. in size.

5/32 in. (4 mm)

wood drill bit or

¼ in. (6 mm) +

3/8 in. (10 mm)

masonry drill

bits

Tape measure

Phillips screwdriver

Pencil

Level

Safety glasses